Many PC gamers choose to build their own computer rather than buy a pre-built model. One of the main reasons is upgradeability. This refers to the ability to change out components, such as CPUs and GPUs, for newer models. This is not possible with laptops, as they have limited usable space and use proprietary motherboards that can’t be changed.
The first step in a gaming pc build is installing the motherboard. This should be done carefully, as the CPU socket only fits in one position and there are pins that can get bent if not careful. For this, it’s a good idea to wear some protective eyewear. You also want to invest in a set of tiny screwdrivers that can deal with smaller screws, like those used in M.2 SSD slots. Chunky pliers work fine, but needle-nose pliers offer more control and precision, especially when dealing with fan clips or expansion slot covers that can be tricky to remove without ripping the metal.
Once the motherboard is in place, install any necessary RAM sticks. These should go in the correct slots on the motherboard, following the manufacturer’s instructions. Then install the CPU cooler, making sure to place some thermal paste between the aluminum heatsink and the CPU. Next, connect the power supply to the motherboard using the appropriate 8-pin connector (usually located above the CPU socket). Most of the time, this is self-explanatory but if you’re not sure, check your PSU’s manual or online guides. gaming pc build